Preloader

loading...

EN
Palau
0
Cart
0

KV-D3/2P tactical switch

  • Description
  • Video reviews
  • Compatibility
KV-D3/2P remote switch can be mounted on Basis rail and Picatinny rail. It is designed to control TWO products at the same time. For example, you can combine "Kleshch-2" dual light (IR + visible) with "Perst-4", "Perst-4M" or "Perst-4P" dual laser (IR + visible), obtaining a full range of visible/IR functions in two devices. Or "Kleshch-1" light can be combined with "Perst-3" combined device (3-in-1: IR illuminator, IR laser, visible laser), adding a visible flashlight to the capabilities of the combined device.

Available in three versions depending on the connector used. There is Zenitco connector of our own design. There is a connector that we used earlier. It is possible to connect both two products with Zenitco connector, two products with the previous connector, and one product with previous connector, the other with Zenitco connector.
  • Version 1.0 (not engraved on the switch): the previous type of connector is used.
  • Version 1.1: one connector of the previous version, the second - Zenitco connector.
  • Version 2.0: Zenitco connector is used.
See full explanation of compatibility of versions in the article. KV-D3/2P tactical switch is not compatible with flashlights and combined devices of older generations that are not stated in the article. If the generation is not stated in the product name or not engraved on the product body, that means, that it is an older generation.

Work of KV-D3/2P:

KV-D3/2P tactical switch performs the same function as the buttons on the body of the device it works with. The rotary switch is designed to adjust the brightness.

The "KV-D3/2" is made of D16T alloy with a black coating. 

Overall dimensions: 310x29x14  ± 5 mm

Weight: 43 ± 5 g.

Ambient temperature during operation: from -20 ° С to + 40 ° С 

Warranty period of storage and operation: 12 months.

In the kit :
"KV-D3/2P" tactical switch
1 pc.
Picatinny rail adapter 1 pc.
Oval mount 1 pc. 
Plate mount 1 pc. 
Manual 1 pc. 
To install the "KV-D3/2P" tactical switch , you need:
1) Connect the KV-D3/2P to the product by plugging the plug into the connector after removing the rubber pad and aligning the contact parts. To detach the button, hold the retaining ring on the connector and pull it.
 2) Install KV-D3/2P on rifle.
No video installation instructions...