Preloader

loading...

EN
Switzerland
0
Cart
0

Zenitco connector: KV-D3/2P compatibility

Zenitco connector: KV-D3/2P compatibility
29.03.2022
Due to the necessity of import substitution, we have designed our own connector (Zenitco connector). All of our products are currently switching to it. All the shortcomings that the previously used connectors had were taken into account and eliminated. The Zenitco connector is very reliable: the contacts are positioned in such a way that in case of an incorrect installation attempt, they cannot be bent and damaged. Only when two trapeziums are connected to each other, the connector plugs in easily.

We continue to provide support for products on previous connectors, as well as the sale of remote switches for such products. All new products will be with switches with Zenitco connector. The ability to control two products simultaneously by KV-D3/2P switch was also taken into account. We have made an additional version of this switch that allows you to control two devices: one with the new Zenitco connector and the other with the previous connector. In total, there are currently three versions of the KV-D3/2P:
  • Version 1.0 (not marked on the switch): the previous type of connector is used.
  • Version 1.1: one connector of the previous version, the second is the new one.
  • Version 2.0: uses the new Zenitco connectors.
The version can be selected on the product page in the "kit type" section.
To avoid confusion with the versions of compatible products, we publish a compatibility table. For example, if you have a Kleshch-2 flashlight version 2.0, which you want to control simultaneously with the Perst-4 version 4.0, then you need the KV-D3/2P switch version 1.1. And if Kleshch-2 is version 2.1, then the KV-D3/2P switch version 2.0 is required.
kvd3-2p-perst-klesch.jpg
KV-D3/2P V1.1 combines Klesch-2 V2.0 and Perst-4 V4.0

  Zenitco connector (compatible with products beginning with version): Previous connector (compatible with products of following versions):
Klesch-1 Version 2.1 Version 2.0
Klesch-1IK Version 2.1 Version was not engraved
Klesch-1+laser Version 2.1 Version was not engraved
Klesch-1IK+laser Version 2.1
Version was not engraved
Klesch-2 Version 2.1 Version 2.0
Klesch-2D Version 2.1
Version 2.0
Klesch-2D-IK Version 2.1
Version 2.0
Klesch-2P Version 2.1
Version 2.0
Klesch-2P-IK Version 2.1
Version 2.0
Klesch-2PS+laser Version 2.1
Version 2.0
Klesch-2IKS+laser Version 2.1
Version 2.0
Klesch-2U Version 2.1
Version 2.0
Klesch-2U-IK Version 2.1
Version 2.0
Perst-2 Version 2.1
Version 2.0
Perst-3 Version 3.1
Version 3.0
Perst-4 Version 4.0
Version 3.0
Perst-4M Version 3.1 Version 3.0
Perst-4P Version 3.1 Version 3.0
It is important to note that products of earlier versions than those specified in the table are not compatible with KV-D3/2P. Their compatibility can be found in the article.
If, after reading the article, you are still not sure which version is right for you, please contact us by e-mail indicated in the "Contacts" section. Attach photos of the connectors on the products that you would like to connect with the KV-D3/2P switch and markings with the versions of these products to the e-mail. We will help you.