Tactical flashlight with strobe mode and integrated IR laser.
Kit type:
- Basic
- Pistol
- -
$780.41
(48700 Р)
(48700 Р)
For sale in the territory of the Russian Federation
- Description
- HOW TO INSTALL?
- Compatibility
1.Purose of equipment
1.1. "Klesch-1IK +laser" is designed for detection and illumination of targets in the dak with a night vision device.
1.2. The product is a small-sized optomechanical device that generates a luminous flux.
1.3.The product is designed for installation on various weapons (pistols,rifles).
ATTENTION !!!
IT IS STRICTLY PROHIBITED TO POINT A LASER RAY OR ITS MIRROR REFLECTION ON THE ORGANS OF VISION!!!
2.Characteristics:
2.1. Light source - LED in the IR range, infrared laser with a wavelength of 850 nm.
2.2. The product is powered from two CR123 batteries with a nominal voltage of 3 V.
2.3. Time of continuous operation with a stable luminous flux from a standart battery in constant mode: not less than 1.2 hours.
2.4. Overall dimensions with the pistol rear part:(101 x 38 x 37) ± 3 mm.
2.5 Weight of the product without batteries with pistol rear part: 159 ± 3g.
2.6 Ambient temperature during operation : - 20C to +40C
2.7.The beam can be shifted down or up by removing the protective cover( 15 pic. 1) and rotating the screw (13 pic.1) of the alignment unit counterclockwise or clockwise.
2.8. The beam can be shifted to the left or to the right by rotating the screw (14 pic.1) counterclockwise or clockwise.
In the kit:
1.1. "Klesch-1IK +laser" is designed for detection and illumination of targets in the dak with a night vision device.
1.2. The product is a small-sized optomechanical device that generates a luminous flux.
1.3.The product is designed for installation on various weapons (pistols,rifles).
ATTENTION !!!
IT IS STRICTLY PROHIBITED TO POINT A LASER RAY OR ITS MIRROR REFLECTION ON THE ORGANS OF VISION!!!
2.Characteristics:
2.1. Light source - LED in the IR range, infrared laser with a wavelength of 850 nm.
2.2. The product is powered from two CR123 batteries with a nominal voltage of 3 V.
2.3. Time of continuous operation with a stable luminous flux from a standart battery in constant mode: not less than 1.2 hours.
2.4. Overall dimensions with the pistol rear part:(101 x 38 x 37) ± 3 mm.
2.5 Weight of the product without batteries with pistol rear part: 159 ± 3g.
2.6 Ambient temperature during operation : - 20C to +40C
2.7.The beam can be shifted down or up by removing the protective cover( 15 pic. 1) and rotating the screw (13 pic.1) of the alignment unit counterclockwise or clockwise.
2.8. The beam can be shifted to the left or to the right by rotating the screw (14 pic.1) counterclockwise or clockwise.
In the kit:
Flashlight with pistol rear part |
1 pc. |
Rifle rear part |
1 pc. |
Battaries (installed into device) |
2 pcs. |
KV-D1P tactical switch |
1 pc. |
Manual |
1 pc. |
Weapon model:
Compatible with any type of weapon with Picatinny rail.
Our offers:
buy with this product

KV-D3/2P tactical switch
Tactical switch KV-D3/2P with mounting on the Basis rail and Picatinny rail.

KV-D3/2P tactical switch
Tactical switch KV-D3/2P with mounting on the Basis rail and Picatinny rail.






KV-D3/2P tactical switch
Tactical switch KV-D3/2P with mounting on the Basis rail and Picatinny rail.
Kit type:
- Connector version 1.0
- Connector version 1.1
- Connector version 2.0
- -
$131.40
(8200 Р)
(8200 Р)
For sale in the territory of the Russian Federation