"Perst-4" combined device gen.4.1 (GREEN+)

ATTENTION !!!

IT IS STRICTLY PROHIBITED TO POINT A LASER RAY OR ITS MIRROR REFLECTION ON THE ORGANS OF VISION!!!

The combined device (hereinafter referred to as the CD) "Perst-4" (GREEN+) is intended to indicate the target when observing, inspecting and seeing shooting from small arms with CD "Perst-4" the installed on it at night in two ranges: green 520 nm and infrared 850 nm, and IR lighting with a wavelength of 850 nm. The product is a small-sized optical-mechanical device that forms the luminous flux of laser radiation.

Please note that the flashlight has a new connector of our own production!!!

The product is installed on various types of small arms on the Picatinny rail. KV-D2 tactical switch (in the kit) can be installed both on Picatinny and Basis rails.

Laser light source: combined green semiconductor laser module (wavelength - 520 nm) and IR (wavelength - 850 nm) glow.

IR light source: laser diode (wavelength - 850 nm).

Power supply: CR123A (installed) / battery (3 V).

Effective range in the dark:

green+: 300 ± 100 m.;
IR: 400 ± 100 m.

Product weight without batteries: no more than 210 g.

Overall dimensions: (37х60х91) ± 3 mm.

Ambient temperature during operation: from -20 ° С to + 40 ° С

Time of continuous operation with a stable luminous flux (constant brightness on mode): at least 12 hours.

Warranty period of storage and operation: 12 months. (from the moment of commissioning).

Operational Benefits :

The ability to turn on both the buttons located on the case, and from the remote tactical button.
The ability to adjust the brightness (both from the body and from the remote button).
The ability to lock the product.
The laser operation indicator is on the product body.
The presence of a pulsating mode with a frequency of 2 Hz.
Unified alignment of both beams.
Compatible with all tactical switches from "D" line*.

* Switches from "D" line (KV-D2 and others) are compatible with "Perst-4" CD, starting from gen.3.0. If you plan to use it in conjunction with the Klesch-2 flashlight (starting from version 2.0), you should use the KV-D3/2P (double) switch.

In the kit :