Rail "Handguard B-23 L" is all-milled product made of aluminum alloy D16T coated with black / desert color.

Installed in place of the regular handguard of  "Saiga-308" modification 61 and "Saiga-308" modification 46.

"B-23L handguard" rail has a Basis rail on three sides, that allows to mount:

• B-2 (45mm), B-2U (75mm), B-2L (35mm) side Picatinny rails on three sides;
• A-1L and A-2L slingmounts;
• RL-1 hand stoppers;
• RK-0L,RK-1L,RK-2L, RK-4L and RK-6L grips;
  
• NPN-2 Basis rail covers;
• FP-3 wire holders.
  
• B-33 RPK dust cover;
• B-19RPK upper handguard.

Specifications

Material: D16T aluminum alloy
Weight: 104 ± 5 g
Overall dimensions: (167x41x42) ± 5 mm
Operating ambient temperature range: -50 to +50°C

 In the kit:

B-23L handguard		1 pc.
Manual		1 pc.

To install the rail "Handguard B-23L" on the weapon is necessary:

 1. Make an incomplete disassembly of the weapon and remove the standard handguard.

 2. Install instead of the regular handguard rail "Handguard B-23L", make the Assembly of weapons.

 3. Rail "Handguard B-23L" should be installed on the regular place in the groove of the receiver of the weapon very rigidly. To do this, you must:

    - wear on the rail and "Handguard B-23L" regular washer swivels;

    - align the free end of the rail "Handguard B-23L" with the slot of the receiver;

    - putting on the washer antabki wooden or metal spacer, hammer hammer rail "Handguard B-23L" in the receiver of the weapon;

    - we assemble weapons.

 4. To install the rail "Handguard B-23L" in the receiver of the weapon should not be sawed with a file because it can lead to the formation of backlash at the junction of the railwith the receiver.

   The stiffness of the landing handguard determines the rigidity of the landing ghting devices, which affects the accuracy of the shot!